Multi-Image Splicing Processor
13
Step 7:
According to operation above, screen body has been divided into three images with
proportion of 1:2:1. Default display content of each image is S1. If different signal sources should
be designated for each image, click of front panel to enter into image switch interface.
Select image by rotate knob and choose signal by click of S1-S6 of front panel. For example, if
signal of image 2 is S6, click “WIN” to enter into image switch, then adjust rotate knob to image 2
(it’s selected if padded) and finally click “S6” of front panel. After selecting each image, save final
data which is the same with step 4.
Up to now, program debugging is finished. If any display method is needed in later stage, it’s
just OK to call saved mode. There are two ways for mode call. When mode number is not big, just
click M1-M6 of front panel which are shortcut key for mode call; when mode number is big (over
6), user mode call should be made. Click “MENU” to enter into main menu interface, then select
“User mode” and call needed mode.
Image Switch
Image 2
S1
Image 3
S1
Image 1
S1
WIN
User mode
User Mode 1
Device
Mode
2×2
Image Layout 1
Mode 1
Mode 2
Mode 3
Mode 4
Mode 5
Mode 6
Mode 7
Mode 8
Image 1
S1
