dNaNo CCS
29
1
1
LED Indicator
LEDインジケーター
Push the mark side of the Throttle Trim and keep it down.
スロットルトリムの
のマーク側を押し、押したままの状態を保持する。
2
2
Push the power button to switch the transmitter ON.
※
Keep the mark pressed down, but release power button.
電源ボタンを押し、送信機の電源を入れる。
※スロットルトリムの
マーク側は押したまま、電源ボタンから指を離す。
4
Once the LED indicator light has dimmed, the preparation of the transmitter is complete.
LEDが先程より暗く点灯したら、送信機側の準備は完了。
Prepare Tool A and locate the LED indicator
and pairing button.
(LED indicator is below the IC Tag).
ツールAを用意し、ペアリングボタン、
LEDインジケーターの場所を確認する。
(LEDインジケーターはICタグの下に
あります。)
3
3
Confirm the LED is on. When the LED goes out after about 3 seconds, release finger from the Throttle Trim.
LEDインジケーターが点灯しているのを確認する。約3秒後にLEDが消灯したら、スロットルトリムから
指を離す。
2
Pairing Button
ペアリングボタン
Tool A
ツールA
3
08.02
7
Let's Drive!
走行させましょう