Kyocera TJEP finish, Руководство пользователя

Страница: 10 / 48

10
Daily maintenance/precautions
Before you start, make sure the air pressure is correct. The maximum air pressure is specified on the nailer.
Keep the nailer clean.
Make sure that you use the correct fasteners before you start. Use only fasteners specified by the manufacturer.
Empty the water separator for the compressor daily.
Make sure that the nailer is maintained regularly.
Make sure to grease the nailer with the correct lubricant.
Cut off the air supply and empty the magazine when the work is done.
Make sure that the magazine is tightened properly.
If the nailer behaves unusually, cut off the air supply immediately.
NB: All the above-mentioned precautions are pivotal in regards to safety, the tool’s functionality and the lifetime of
the nailer.