Kyocera TASKALFA, Руководство по эксплуатации

Страница: 50 / 252

FAX Operation (Basic)
3-10
the receiving system does not have such capability,
originals are sent at an image quality of 200 × 200
dpi (Fine).
3
Press [OK].
Selecting the original size
Set the size of the original to be faxed.
1
Press [Org./Sending Data Format], and then
[Original Size]. The original size setting screen
appears.
2
Select the original size.
* The input units can be changed in the System menu. Refer to the machine’s Operation Guide .
3
Press [OK].
NOTE:
If the Start key is pressed without
setting the original size, the original size setting
screen will appear prior to transmission.
Item How to Select Detail
Standard
Sizes 1 Have the size of original
detected automatically, or
select from the standard
sizes. Metric models: Auto, A3, A4-R, A4, A5, A6, B4, B5-R,
B5, B6, Folio and 216x340mm
Inch models: Auto, Ledger, Letter-R, Letter, Legal,
Statement, Executive and Oficio II
Standard
Sizes 2 Select from the standard
sizes not included in the
Standard Sizes 1. Metric models: Ledger, Letter-R, Letter, Legal,
Statement, Executive, Oficio II, 8K, 16K-R and 16K
Inch models: A3, A4-R, A4, A5, A6, B4, B5-R, B5, B6,
Folio, 8K, 16K-R, 16K and 216x340mm
Others Select from envelope,
postcard or the custom
sized originals. Hagaki, Oufuku Hagaki
Size Entry Enter the size not
included in the standard
sizes 1 and 2*. Inch models
Horizontal: 2 to 17" (in 0.01" increments), Vertical: 2
to 11.69" (in 0.01" increments)
Metric models
Horizontal: 50 to 432 mm (in 1 mm increments),
Vertical: 50 to 297 mm (in 1 mm increments)
NOTE:
The scan resolution must to equal to or higher than the fax resolution. If the fax resolution is higher
than the scan resolution, the scan resolution will automatically change to the same setting as the fax
resolution.