Kyocera Ri 4530 Copystar, Руководство по обслуживанию, Страница: 280 / 384

2BC/D-1
1-6-76
( 6) Adjusting the margins for scanning the original from the DF
Perform the following adjustment if margins are not correct.
Caution
Before making the following adjustment, ensure that the above adjustments have been made in maintenance mode.
Procedure
Figure 1-6-129
U402
(P. 1-6-18)
U404
U403
(P. 1-6-38)
Change the setting.
Increasing the value using the cursor
up key makes the margin wider.
Decreasing the value using the
cursor down key makes the margin
narrower.
Yes
No
Start
Enter maintenance mode.
Enter “404” using the numeric keys.
Press the start key.
Place an original on the DF
and make a test copy.
Press the start key.
The new setting
is stored.
Setting range (initial setting)
DF left margin: 0 – +10.0 (1.5)
DF leading edge margin: 0 – +10.0 (3.0)
DF right margin: 0 – +10.0 (2.0)
DF trailing edge margin: 0 – +10.0 (4.0)
Changing the value by one moves
the margin by 0.1 mm for all.
Select the item to be adjusted.
Are the margins correct?
Press the interrupt key.
A MARGIN: DF left margin
B MARGIN: DF leading edge margin
C MARGIN: DF right margin
D MARGIN: DF trailing edge margin
Yes
No
Proceed to another mode?
End
Press the stop/clear key to
exit maintenance mode.
DF leading edge margin (3
±
2.5 mm)
DF left margin
(2.5
+1.5
mm)
DF right margin
(2.5
+1.5
mm)
Ejection direction
(reference)
DF trailing edge margin
(3
±
2.5 mm)
–2.0
–2.0
1-6-72