Kyocera KM-3650W, Руководство по эксплуатации

Страница: 14 / 50

13
The message shown below appears in case the media type setting is Vellum or Film.
When selected “Auto Size”, it is impossible to select any media source of “Roll 1”, “Roll 2”
and “Bypass”.
3.3.1.2 Auto Zoom
A proper zoom ratio is automatically selected, considering the width of the original and
media, which fits the image to the media width,
To apply “Auto Zoom”, press the
L1 Key repeatedly for “Auto Zoom”.
3.3.1.3 Manual
“Manual” enables an image to be printed on a given media source of “Roll 1”, “Roll 2” and
“Bypass” at discretion manually.
Copying is carried out if the image is larger than the media, in such part of the image may
be lost.
To apply “Manual”, press the
L1 Key repeatedly for “Manual”.
3.3.2 Image
Type
The following settings are provided for the original image type.
“Line” is suitable for simple line originals.
“Line/Grayscale” is suitable for originals which include lines and areas of shade together.
“Grayscale” is suitable for photographic originals and areas of shade originals.
Press the
R1 key repeatedly for a proper image type.
3.3.3 Density
Images are printed at an appropriate density on “Auto”.
Press the
L2 Key to lighten or R2 Key to darken the image manually.
3.3.4 Media
Source
Images are printed on a specified media source of “Roll 1”, “Roll 2” and “Bypass”.
Press the
L3 Key repeatedly for a proper media source.