Kyocera KM-3650W, Руководство по эксплуатации

Страница: 12 / 50

11
3.2 Copy Operation
3.2.1 Basic
Copy
Place originals facing up on the Original Table.
Insert originals when KM-3650w is ready to copy.
(Available to read originals if KM-3650w is warming up, the printing will start after getting
ready.)
KM-3650w starts printing when finished reading whole the reading area of the original.
Press the
Start Key is required each time to start reading originals when “Auto Start” is
“OFF”.
The default Auto Start time is 1.5 seconds. It is changeable at your option.
The number of copy count covers 1 to 99.
3.2.2 Set
Copy
A set copy is a copy composed of several pages.
A set copy can contain up to 99 of pages.
The number of set copy count covers up to 99.
Press the
Start Key to start printing when finished reading all the originals.
(Any original inserted to the scanner can prevent KM-3650w from starting printing.)
You should wait for the completion of the current printing to make another set copy.
You can choose between two sort orders for set copy in Advanced Settings.
(a) Sort Mode: 1, 2, 3 Æ 123, 123, 123
(b) Sort Mode: 1, 2, 3 Æ 111, 222, 333
How to make a set copy and choose Sort Mode is described later.
The number of originals you have read for Set Copy is indicated in the upper right of the
screen.
After reading the first page of the original, “Ready to Set Copy” and “Press Start to start
printing” are indicated by turns. Press the
Start Key to start printing.
(Any original inserted to the scanner can prevent KM-3650w from starting printing.)
To cancel the current reading and printing set copy, follow the process below.
1. Press the
R3 Key to enter Advanced Settings.
2. Press the L4 or R4 Key to enter Advanced Settings (3).
3. Press the L2 Key repeatedly for “OFF”.