Kyocera FS-1110, Руководство по эксплуатации

Страница: 70 / 88

5-8 Troubleshooting
Maintenance Indication
The table below shows the indicator combinations when user
intervention is required. It is assumed that the printer is online and is
processing data.
Indicator Meaning Remedy
There is no paper in the cassette,
Manual Feed tray. Load paper into the paper source.
The top cover is open. Close the cover.
The cassette is not inserted
properly. Re-insert the cassette and then try
printing again.
The developer unit or toner
container is not installed. Install the developer unit or toner
container.
The cassette does not contain the
paper specified by the printer
driver. Load the paper into the cassette #1 and
then restart printing. You can change
the paper source by pressing the
[GO] .
The paper sizes do not match. If the paper size in the paper source
differs from the paper size and type
specified by the printer driver, you can
print by supplying paper from the
Manual Feed tray. Load the correct
paper size and type into the Manual
Feed tray and press
[GO] to begin
printing.
If you want to supply paper from a
source other than the Manual Feed
tray, you can change the paper source
by pressing
[GO] .
If the paper fed from the Manual Feed
tray is a different size from the specified
paper size, a paper jam will occur.
A paper jam occurred during
printing. Open the printer cover and remove the
jammed paper.