Note
Note
Note
Be sure to provide enough space around the printer. Prolonged use without
sufficient clearance may cause heat to build up inside the printer, resulting in
fire.
WARNING
1
.
Checking Shipped Components
3
.
Loading Paper in the Paper Cassettes
For details on paper usable with this machine, refer to the
Operation Guide
(CD-ROM).
1
Unpacking
2
Shipped components
1
Pull the paper cassette out.
5
Set the supplied paper size plate at the
front of the paper cassette.
6
Push the paper cassette back until
it stops.
2
Remove the lift plate stopper
and attach it to the storage
location.
3
Adjust the paper stopper to fit
the paper size.
2
Adjust the paper guides to fit the
paper size.
Paper Size Plates (4)
Printer
Toner Container
Waste Toner Box
Power Cord
Installation Guide
(This sheet)
CD-ROM
Front Cover
MP Tray
Paper Cassette
1
Pull the paper cassette out.
Paper Cassette
Lift Plate Stopper
4
Load paper.
Paper Size Adjusting Tab
Paper Guides
Paper Stopper
7
Remove the tapes.
2
.
Removing the lift
plate stoppers
Paper Size Plate
1
2
3
4
5
6
EP 510DN
Installation Guide
Clearance
Environment
Temperature: 10 to 32.5
°
C (50 to 90.5
°
F)
Humidity: 15 to 80%RH
Left: 300 mm
(12 inches)
Right: 300 mm
(12 inches)
Rear: 100 mm
(4 inches)
Front: 1,000 mm
(40 inches)
When lifting or moving the printer, pull up the 4 handles on both sides of the printer, then ALWAYS carry the printer with at least 4 people,
and another person to coordinate.
The paper cassette will hold approximately 500 sheets of
pape r wit h 75 g/m
2
(2 0 lb. ) to 80 g/m
2
(2 1 lb. ) basi s
weight.