Kyocera ECOSYS PA2100cwx, Руководство по эксплуатации

Страница: 177 / 234

8-8
Troubleshooting > Troubleshooting
Printouts are curled. ― Turn the paper over in the cassette, or
turn the orientation 180 degrees around
in which the paper is positioned.
page 3-2
Is the paper damp? Replace the paper with new paper. page 3-2
Cannot print. Is the machine plugged in? Plug the power cable into an AC outlet. —
Is the machine powered on? Turn on the power switch. page 2-9
Are the USB cable and network cable
connected?
Connect the correct USB cable and
network cable securely.
page 2-7
Cannot print with USB drive.
USB drive not recognized. Is the USB host blocked? Select [ Unblock ] in the USB host
settings.
page 6-22
— Check that the USB drive is securely
plugged into the machine.
—
While "Auto-IP" is set to
[
On
], the IP address is not
assigned automatically.
Is a value other than "0.0.0.0" entered
for the IP address of TCP/IP(v4)?
Enter "0.0.0.0" for the IP address of
TCP/IP(v4).
page 2-17
The machine is emitting
steam in the area around the
paper ejection slot.
Check the room temperature to see if it
is low, or if damp paper was used.
Depending on the printing environment
and the paper's condition, the heat
generated during printing will cause the
moisture in the paper to evaporate, and
the steam emitted may look like smoke.
This is not a problem, and you can
continue printing. If the steam concerns
you, raise the room temperature, or
replace the paper with a newer, dryer
paper.
—
Symptom Checkpoints Corrective Actions
Reference
Page