Kyocera ECOSYS P7035cdn, Руководство по обслуживанию

Страница: 170 / 178

2PR
2-3-10
YC608 B1 DRUMMOTMRDYN I 0/3.3 V DC Drum motor M ready signal
Connected
to the drum
motor Y/K/
M/C B2 SPEEDSEL O 0/3.3 V DC Drum motor M speed change signal
B3 DRUMMOTCLK O
0/3.3 V DC (pulse) Drum motor M clock signal
B4 DRUMMOTMREN O 0/3.3 V DC Drum motor M: On/Off
B5 GND - - Ground
B6 +24V3 O 24 V DC 24 V DC power source
B7 DRUMMOTCRDYN
I
0/3.3 V DC Drum motor C ready signal
B8 SPEEDSEL O 0/3.3 V DC Drum motor C speed change signal
B9 DRUMMOTCLK O
0/3.3 V DC (pulse) Drum motor C clock signal
B10 DRUMMOTCREN O 0/3.3 V DC Drum motor C: On/Off
B11 GND - - Ground
B12 +24V3 O 24 V DC 24 V DC power source
YC609 1 +24V1 O 24 V DC 24 V DC power source
Connected
to the left
side fan
motor 2 LSIDEDRN O 0/12/24 V DC Left side fan motor: Full speed/Half speed/Off
YC610 1 GND - - Ground
Connected
to the high
voltage
PWB 2 2 T1KCNT O 0/24 V DC Primary transfer bias control signal (Black)
3 T2CNT O 0/24 V DC Secondary transfer bias control signal
4 T2RREM O 0/24 V DC Secondary transfer bias (reverse) control signal
5 SSEL O 0/24 V DC Separation needle bias output change signal
6 SREM O 0/24 V DC Separation needle bias: On/Off
7 +24V4 O 24 V DC 24 V DC power source
YC613 1 +24V1 O 24 V DC 24 V DC power source
Connected
to the LSU
fan motor 2 LSUFANDRN O 0/12/24 V DC LSU fan motor: Full speed/Half speed/Off
YC615 1 ENVEMOTA O 24/0 V DC Fuser pressure change motor: Fwd/Stop/(Rev)
Connected
to the fuser
pressure
change
motor 2 ENVEMOTB O 24/0 V DC Fuser pressure change motor: Rev/Stop/(Fwd)
YC616 1 +24V3 O 24 V DC 24 V DC power source
Connected
to the fuser
fan motor 2 2 SUBFANDRN O 0/12/24 V DC Fuser fan motor 2: Full speed/Half speed/Off
YC617 1 +24V3 O 24 V DC 24 V DC power source
Connected
to the ID
solenoid 2 IDSOLDRN O 0/24 V DC ID solenoid: On/Off
YC618 1 +24V1 O 24 V DC 24 V DC power source
Connected
to the devel-
oping fan
motor 2 2 DLPFANDRN O 0/12/24 V DC Developing fan motor 2: Full speed/Half speed/Off
YC619 1 DLPEEDAT I/O 0/3.3 V DC Developing PWB EEPROM data signal
Connected
to the drum
relay PWB 2 DLPEECLK O 0/3.3 V DC (pulse) Developing PWB EEPROM clock signal
Connector Pin Signal I/O Voltage Description