Kyocera DIGNO BX2, Руководство пользователя

Страница: 311 / 316

30/35
Safety Precautions
* Somewhat low water pressure (6 L or less per minute)
Shared Precautions

Close Card Slot Cap firmly after confirming rubber seal is correct location. Lodged particles, no
matter how small (lint, a single hair, grain of sand, etc.), may allow water intrusion.

Do not insert pointed object between Card Slot Cover and handset. May scratch seal and allow
water to enter.

Do not open or close Card Slot Cover while wearing gloves. Lodged particles (lint, hair, sand,
etc.) from glove may allow water intrusion.

Before opening or closing Card Slot Cap, check that handset and hands do not have moisture,
sand, grime, etc. on them. Any moisture, sand, grime, etc. can enter handset and become lodged
in Card Slot Cap, and may cause malfunction or allow water seepage. If moisture, sand, grime,
etc. is visible, no matter how small, first wipe handset and hands with lint-free clean, dry cloth
before handling.

Do not leave handset wetted. Water may enter from gaps. May also reduce volume. If wetted,
shake handset, and promptly remove as much water as possible with a lint-free clean, dry cloth.
In cold regions, handset may freeze and cause malfunction.

Handset is waterproof for only for fresh water/tap water. Not waterproof for hot water, salt water,
soap water, chemicals, sweat, etc. If exposed to other types of moisture or sand/mud/etc.,
promptly wash off with room temperature tap water. Hold handset making sure Card Slot Cap
cannot open, and hand-wash without using a brush.
* Somewhat low water pressure (6 L or less per minute)

Do not expose to strong water pressure (e.g., tap/shower water that hurts) above rating (IPX5,
IPX8) or immerse for extended period.

Do not wash in a washing machine, ultra-sonic washing machine, etc.

Do not subject to strong shock while submersed (e.g., drop into basin, toilet, washing machine
with water).

Do not poke holes in Mic, Earpiece/Speaker, or External Device Port with a sharp object.

Rubber seal on back of Card Slot Cap is vital to waterproofing/dustproofing. Observe the
following.
・
Do not remove or scratch.
・
Do not allow particles to adhere. Lodged particles (lint, hair, sand, etc.) may allow water
intrusion. Always remove.
・
Remaining liquid other than fresh water or tap water (hot water, salt water, detergent water,
chemicals, sweat, etc.) may degrade waterproofing.
・
Be careful rubber seal is not pinched when securing Card Slot Cap. Forcing Cap closed with
rubber seal pinched can scratch seal and may degrade waterproofing/dustproofing.
・
Replace components for water, dust, and shock resistance every two years regardless of