Kyocera Ai5555, Инструкция по эксплуатации

Страница: 54 / 167

NetWare Configuration 3-33
NetWare Configuration
Configure Using NetWare 2.15 and 3.1x
Using PCONSOLE
Setting Up Notify Options for NC-2 Printer(s) - Optional
The NC-2 supports enhanced Notify feature for printers, which notifies
users or user groups of problems occurring with a NC-2 print job, such as
when the printer is off-line, jammed, open, out of paper, in need of a reset,
low on toner; or when it requires manual paper feed. Notify also informs
users of a wrong form loaded in the printer, and when there is a memory
error, engine failure, or a higher priority print job from another source.
1. Choose Notify List for Printer on the Print Server Configuration menu.
2. Select a printer from the Defined Printers list. The notification screen
appears (which should be blank for the initial installation).
3. Press [INS] to view a list of Notify Candidates.
4. Select the user or group from the Notify Candidate list.
5. Set the first and next intervals in the Notify Intervals screen.
(It is recommended that you use the default settings.)
The first and next intervals determine how many seconds the network will
wait before it notifies candidates about a print job problem. The intervals
specify how often, after the first notification, candidates will be notified.
Type in the number in seconds only for each interval, then press Enter.
6. Press [Esc] to exit the program.
7. Select YES when prompted to save changes. You may exit the
PCONSOLE function or make changes to your NC-2 configuration.
NC-2