Kyocera Ai5555, Инструкция по эксплуатации

Страница: 42 / 167

NetWare Configuration 3-21
NetWare Configuration
Using the Network Management Utility
Using Help Screens
Protocols
Setup TCP/IP
This screen lets you update or change the TCP/IP configuration settings you
entered for the print server. Each field is described below.
IP Address
Type in the IP address for the print server if one is not listed on this screen.
You can also enter the IP address here if you do not have access to a rarp
server. See your system administrator for the address.
Subnet Mask
Type in the Subnet mask for the print server if one is not listed on this
screen. Enter the Subnet Mask here if you have no access to a rarp server.
Default Gateway
Type in the default Gateway address, if required, to allow the print server to
communicate with other subnets. If you have no address, leave the field
blank. See your system administrator for the Default Gateway address.
Base Port Number
Enter the base number assigned to the print server. The default No. is
10000.
Enable LPD Banners
When the box is marked, printers print out a banner page for each print job.
Parallel Port
• PCL: PCL and compatible print jobs.
• PS: For PostScript print jobs.
• ASCII: For all ASCII and text print jobs.
• Other: For all other print job types, such as line printers, etc.
• NoFF: For no form feed. When this box is checked, no form feed will be sent to the
printer as part of a print job. A form feed is used to eject the last page of a print job
from a printer. Many printers and applications automatically send a form feed at the
end of a print job. If you need to send a form feed, leave this option unmarked.
Click on [Accept Settings] when you are finished making your entries. This
puts your new entries into effect. Click on [Clear Inputs] to clear the entries
you made or to revert to the previous settings.