Kyocera 1102RX3NL0, Руководство по эксплуатации

Страница: 56 / 242

2-25
Installing and Setting up the Machine > Network Setup
Connecting to Computers or Handheld Devices Unsupported Wi-Fi Direct
Here, we'll explain the procedures for connecting to iOS handheld devices.
1
Display the screen.
1
[ Menu ] key > [ ▲ ] [ ▼ ] key > [ Wi-Fi Direct Set ] > [ ► ] key
2
Enter the administrator ID and select the [ OK ] key.
3
Enter the administrator password and select the [ OK ] key.
4
[ ▲ ] [

] key > [ Wi-Fi Direct ] > [ OK ] key
2
Configure the settings.
[ ▲ ] [

] key > [ On ] > [ OK ] key
3
Restart the network.
[ Menu ] key > [ ▲ ] [ ▼ ] key > [ Wi-Fi Settings ] > [ ► ] key > [ ▲ ] [ ▼ ] key > [ Restart Network ] >
[ OK ] key > [ OK ] key
4
[Menu] key > [ ▲ ] [ ▼ ] key > [Wi-Fi Direct Set] > [ ► ] key
5
Note the network name (SSID), IP address, and password.
6
Configure the handheld device.
1
[ Settings ] > [ Wi-Fi ]
2
Select the network name (SSID) appeared in step 5 from the list.
3
Enter the password that was provided in step 5 > [ Connect ]
The network between this machine and the handheld device is configured.
NOTE
Enter an ID consisting of between 1 and 16 numbers.
Select the [
▲ ] or [ ▼ ] key to enter a number.
Select the [ ◄ ] or [ ► ] key to move the cursor left or right.
The factory default settings for the administrator ID is 4000.
NOTE
Enter a password consisting of between 0 (no settings) and 16 numbers.
Select the [
▲ ] or [ ▼ ] key to enter a number.
Select the [ ◄ ] or [ ► ] key to move the cursor left or right.
The factory default settings for the administrator password is 4000.