Kyocera 1102RX3NL0, Руководство по эксплуатации

Страница: 186 / 242

8-17
Troubleshooting > Troubleshooting
D
Cannot connect server
Press Go ― The job is canceled. Select [ Go ] key.
Check the connection status with
the server.
―
Cannot connect to
Authentication Server ― Set machine time to match the
server's time. page 2-15
― Check the connection status with
the server. ―
Cannot connect. ― This appears when the Wi-Fi or Wi-
Fi Direct connection did not
complete. Check the settings, and
check the signal conditions. page 6-10
Cannot read data in this
ID Card. ― In registration process, the ID card
information was not read correctly.
Hold again the ID card over the ID
card reading part.
If the same message still appears,
the ID card may not be compatible
with this product. Change it to
another ID card. ―
Cannot recognize. ― Make sure your ID card has been
registered. ―
Cannot start this job
Press Go ― You cannot use the specified box.
Job is canceled. Select the [
GO ]
key.
―
Cannot use this
function. ― This message is displayed when a
user tries to use the restricted
function. ―
Close front cover. Is there any cover which is open? Close the cover indicated on the
screen. ―
Connection limit
exceeded. ― Cancel a connection to a portable
device that is not being used, or set
the machine's auto disconnect time
to break portable device
connections. ―
Message Checkpoints Corrective Actions
Reference
Page
Device busy ― This message is displayed when
Remove Device was selected while
a USB memory was being used.
The previous screen is displayed
again 1 or 2 seconds. ―
Duplex disabled
Press GO Did you select a paper size/type
that cannot be duplex printed? Select [ Menu ] to select the
available paper. Select the [ GO ] key
to print without using Duplex
function.
―
Message Checkpoints Corrective Actions
Reference
Page