Kyocera 1102RV3AS0, Руководство по эксплуатации

Страница: 118 / 173

6-15
Troubleshooting > Troubleshooting
Part of the image is
periodically faint or shows
white lines. — Open and then close the front cover. —
— Select [ Adjust print quality ] in the
Maintenance menu, and select
[
Refresh ] in [ Drum refresh ].
page 6-10
— Select [ Adjust print quality ] in the
Maintenance menu and set a lower value for
"Drum charge setting". Decrease the
adjustment value 1 level at a time from the
current value. If there is no improvement after
the value is decreased by 1 level, decrease by
1 level again. If there is still no improvement,
return the setting to the original value.
page 6-10
The previous image remains
and lightly printed. — Make sure the paper type setting is
correct for the paper being used. page 4-17
— Select [ Adjust print quality ] in the
Maintenance menu and set a higher value for
"Drum charge setting". Increase the
adjustment value 1 level at a time from the
current value. If there is no improvement after
the value is increased by 1 level, increase by
1 level again. If there is still no improvement,
return the setting to the original value.
page 6-10
Symptom Checkpoints Corrective Actions
Reference
Page