Kyocera Mita KM-C830 Скачать руководство пользователя страница 43

Страница: 43 / 161

5-3

Section 5 COLOR COPY SETTINGS

3. One-touch image quality adjustment

Select the image quality, for example “Vivid” or “Calm”, according to
the type of copy image you want.

NOTES

• This setting is only available with full color copying.
• This setting is NOT available in the auto exposure mode.
• This setting is NOT available for use together with the color balance

adjustment.

• Select one of the 6 available image quality settings. Multiple

selections are NOT possible.

• Selection is possible between 6 settings: Vivid, Calm, Modulation,

Smooth, Light and Heavy. For a sample of copies made under each
setting, see “Image quality adjustment samples” on page i.

Press the Color Edit key to light the corresponding indicator.

Use the

cursor or the

cursor key to select “

Quick

Image” and then press the Enter key.

Inch specifications

Metric specifications

Inch specifications

Metric specifications

Use the

cursor or the

cursor key to select the image

quality setting that you want to use.

Inch specifications

Metric specifications

Press the Enter key. The image quality will be selected and
an asterisk (

) will appear in front of the number for that

setting.

NOTE

In order to cancel the setting, use the

cursor or the

cursor key to

select that setting again and then press the Enter key. The asterisk
(

) will be removed and the setting canceled.

Use the

cursor key to select “

End” and then press the

Enter key. The message display will return to the “Ready to
copy.” screen.

Inch specifications

Metric specifications

Содержание KM-C830


































































































































































Результаты поиска

Содержание KM-C830

Отзывы:

Kyocera Mita KM-C830, Руководство по эксплуатации, Страница: 43 / 161

Результаты поиска

Содержание KM-C830

Отзывы: