Kyocera Mita FS-6750, Руководство по обслуживанию, Страница: 86 / 161

Operation theory
Engine controller system
4-28 FS-6750
16 VDD Power terminal
17 TNMOC* IN Toner motor over-current detection input L: Over-
current Developer
18 TNEMP* IN Developer interior toner detection input, L: No
toner Developer
19 TNCON Waste toner bottle detection input, H: Not
installed Waste toner bottle
20 CBIAS OUT Transfer reverse bias on output, H: On Neg.
21 VSS Power terminal (Ground)
22 TRCHON2 Transfer limit voltage change Neg. HV unit
23 SDVDR1 OUT Separation remote output, H: On Neg. HV unit
24 HVCLK1 OUT Developing bias clock output 1 HV unit
25 HVCLK2 OUT Developing bias clock output 2 HV unit
26 TRCHON1 OUT Transfer remote on output, H: On Neg. HV unit
27 MCHON OUT Main charging remote on output, H: On Neg. HV unit
28 DEVSEL* OUT Not used Pos.
29 SPVDR2 OUT Separation output current change Neg. HV unit
30 PSEL OUT Transfer current change Neg. HV unit
31 VSS Power terminal (Ground)
32 IXIN IN Quartz oscillator input terminal
33 OVDD Power terminal for quartz oscillator
34 BXIN IN/OUT Quartz oscillator input/output terminal
35 SAMPLE2* OUT Not used
36 REGDR OUT Regist. roller clutch on output, H: On Neg. Drive assembly
37 MPFCLH OUT MP lift solenoid on output, H: On Neg. Drive assembly
38 FEDDR OUT Cassette roller clutch on output, H: On Neg. Drive assembly
39 MPFSOL OUT Paper feed solenoid for MP tray on output, H: On Neg. Drive assembly
40 MMOTRDY IN Main motor ready input, L: Ready Drive assembly
41 VSS Power terminal (Ground)
42 MMOTON OUT Main motor on output, H: On Neg. Drive assembly
43 FGIN IN Main motor rotation clock input Drive assembly
44 BFANON OUT Box fan on output, H: On Neg. Box fan
45 BFANSPD OUT Box fan speed control output, H: High speed/L:
Low speed Pos. Box fan
46 VDD Power terminal
47 FPRST* OUT Front panel reset output, L: Resetting Pos. Front panel
48 POLRDY* IN Polygon motor ready input, L: Ready Scanner unit
49 POLCLK OUT Polygon motor number of rotations setting output Scanner unit
50 POLON OUT Polygon motor on output, H: On Neg. Scanner unit
51 VSS Power terminal (Ground)
52 LASER* OUT Laser light emission enable output, L: Enable Pos. Scanner unit
53 SAMPLE* OUT Laser light quantity sample/hold output 1, L:
Sample Pos. Scanner unit
54 POWCONT OUT Not used Pos.
55 PDIN* IN Pin photo detection input, L: Scanning Scanner unit
56 VDFON2* OUT Not used Pos.
57 PDOUT* OUT Pin photo detection input, L: Scanning Pos. Main I/F
58 SYSRES* OUT Controller reset output, L: Reset Pos. Main I/F
Table 4. 3 g/a pin assignment—2/4
Pin no. Signal In/Out Function Logic Remarks