25
4
Push the center as shown in the figure to make space for
the developer unit.
5
Put the developer unit into that space.
To reinstall the developer unit into the printer, use the reverse procedure of the above.
E
NERGY
S
TAR
®
As an E
NERGY
S
TAR
Partner, Kyocera Corporation has determined that this
product meets the E
NERGY
S
TAR
guidelines for energy efficiency.
The basic objective of the E
NERGY
S
TAR
Program is to reduce environmental pol-
lution by encouraging the manufacture and sale of equipment that uses energy
more efficiently.
This printer is equipped with a sleep timer function that conforms with the stan-
dards of the E
NERGY
S
TAR
Program. This function makes it possible to reduce
the amount of electrical power consumed by the printer. For maximum power
savings, turn off the printer's power supply when not using the printer for
extended periods of time.
For details on the sleep timer function and printer power consumption, refer to
the CD-ROM instruction manual provided with the printer.
Initial settings of the sleep timer function and power saved using the sleep timer
function:
( ): E
NERGY
S
TAR
program guideline
Group for Energy Efficient Appliances (GEEA)
The goal of GEEA is efficient use of energy. This product has a high-efficiency
profile and meets the criteria for receiving the GEEA-Label.
Kyocera ECO-PRODUCT
This product has been developed and manufactured with the express interest of
reducing the impact on the environment.
Using Kyocera's innovative cartridge free technology, Kyocera has created an
advanced printing system that does not require the wasteful replacement and
disposal of a cartridge.
Initial sleep mode setting
Power consumption in sleep mode
15 minutes (15 minutes)
14 W (20 W)
Power consumption in sleep mode
14 W (16 W)
( ): GEEA criteria
Developer Unit
IFS18+EE.book Page 25 Thursday, August 9, 2001 3:38 PM
