KYMCO VISA R 110 Скачать руководство пользователя страница 53 | Manualshive

Страница: 53 / 53

KYMCO VISA R 110 Скачать руководство пользователя страница 53

53

SECTION 6 – EXHAUST EMISSION CONTROL SYSTEM

Crankcase Emission Control System

Your V I S A R 1 1 0 motorcycle’s engine is equipped with a closed crankcase system. Blow-by gases are routed
back in to the combustion chamber via the intake system. This system does not allow the blow-by gases to enter
the atmosphere.

Exhaust Emission Control System

The exhaust emissions from your V I S A R 1 1 0 motorcycle are controlled by engine design, factory-set fuel
delivery, ignition settings, and exhaust system design.

Noise Exhaust Emission Control System

The engine, intake and exhaust systems of your V I S A R 1 1 0 motorcycle were designed to comply with federal,
state and local noise level requirements. Do not modify the engine, intake or exhaust components, as doing so will
affect compliance with these noise level requirements.

Please do not modify or change any KYMCO-designed components that may alter the sound or emission
levels from your V I S A R 1 1 0 motorcycle.

«
...
51
52
53

Содержание VISA R 110






















































Отзывы:

Нет отзывов