background image

 

25 

SECTION 3 - OPERATION

 

 
 

 

 

 
 
 
 
 
 
 
 
 
 
 

7.

 

When approaching a corner or turn, close the throttle 

fully and slow the motorcycle down by simultaneously 

applying both the front and rear brakes. 

8.

 

After completing the turn, open the throttle gradually to 

accelerate the motorcycle. 

9.

 

When descending a steep grade, close the throttle fully 

and apply both brakes to slow the motorcycle. 

     

 

NOTE: At certain speeds, your motorcycle will turn 

more effectively by leaning your body, rather than by 

applying pressure on the handlebars. Practice steering 

in an open, traffic-free area until you are familiar with 

the handling characteristics of your motorcycle.

Excessive braking can cause either wheel to lock, and 

could result in your losing control of your motorcycle. 
Use moderation when first applying the brakes, 

increasing brake lever pressure smoothly and evenly 

to increase the braking performance.  
Avoid continuous use of the brakes, which may result 

in overheating and reduction of the braking system's 

efficiency. 

 

Содержание VISA R 110






















































Отзывы: