KYMCO Super 8 ForU Скачать руководство пользователя

Страница: 9 / 80

Safety information

1.3

General Information

Read the entire operating manual thoroughly before using the
Super 8 ForU!

Ensure that:
• the operating manual is read by all people who drive, care for and

service the scooter.

• all persons who drive, care for, service or repair the scooter have

access to the operating manual at any time.

Any damages resulting from nonobservance of this operating manual are
excluded from the guarantee.

Risk of accidents!

• Do NOT use the scooter if your driving capability is impaired

through consumption of medicine or alcohol.

• Only use the scooter for its correct intended use.

• Only use the scooter when it is in perfect working order.

• If any breakdowns occur, stop using the scooter immediately

and secure it against unauthorized use.

• It is imperative that you always rectify any faults which

could influence the function and safety of the scooter
immediately.

• Observe maximum loading = see Specifications

• Only use accessories and spare parts authorized by

KYMCO Healthcare

UK Limited.

• The scooter is only authorized for transport of one person.

• Do not carry out any seat adjustments while driving.

Tipping hazard!

• Do not adjust the seat if the scooter is standing on an incline.

• Do not lean out over the armrest to the sides or over the

backrest to the rear.

Содержание Super 8 ForU

















































































Результаты поиска

Содержание Super 8 ForU

Отзывы:

Похожие инструкции для Super 8 ForU

Бренды по названию

Популярные бренды

KYMCO Super 8 ForU, Руководство по эксплуатации

Результаты поиска

Содержание Super 8 ForU

Отзывы:

Похожие инструкции для Super 8 ForU

Бренды по названию

Популярные бренды