KYMCO Super 8 ForU Скачать руководство пользователя страница 22

Страница: 22 / 80

Adjusting the seat

6.2

Adjusting the seat position

Adjusting the distance between seat and
tiller

Pull the locking lever (1) upwards and move
the seat forwards or backwards to the
required distance.

Let go of locking lever and engage the
locking mechanism by pushing the seat
slightly forwards and backwards.

Moving the

seat

Accident hazard due to
non-engaged seat!

• Ensure that the seat is properly

engaged after adjustment by
pushing the seat slightly forwards
and then backwards.

Adjusting the armrest
width

6.2.2

Adjusting the armrest width

Loosen both clamping screws (2).

Pull both armrests (3) simultaneously

to the required width.

Secure the armrests by tightening

the clamping screws.

CAUTION!

• Do not pull the armrests further

out than the marking (a) for
maximum armrest width.

6.2.1

(1)

(2)

(3)

(a)

Содержание Super 8 ForU

















































































Результаты поиска

Содержание Super 8 ForU

Отзывы:

Бренды по названию

Популярные бренды

KYMCO Super 8 ForU, Руководство по эксплуатации

Результаты поиска

Содержание Super 8 ForU

Отзывы:

Бренды по названию

Популярные бренды