KYMCO Super 8 ForU Скачать руководство пользователя | Manualshive

Страница: 12 / 80

background image

Safety information

1.6

Safety when handling batteries

Fire hazard!

• Do not cover the battery charger and ventilation slot while

charging batteries.

• Only use the battery charger in well-ventilated areas.

Risk of accidents!

• Only use the original battery charger (included in delivery).

• Let your dealer replace your battery.

• Only use batteries as detailed in the chapter entitled

“Specifications”.

• Observe warning information given by the battery

manufacturer.

• Batteries are extremely heavy.

Burn hazard due to damaged batteries!

Batteries discharging acid can lead to serious burns.
• Do not touch damaged batteries with your bare hands. Use

rubber gloves!

• If acid should contact your skin, wash the affected area

immediately with plenty of water and contact a doctor.

• If acid should come in contact with your eyes, rinse them out

immediately with lots of water and visit a doctor.

• Always change any clothing soiled with battery acid

immediately.

Safety - information about electronics

Accident hazard due to failures!

Radio, television, radio transmission devices and mobile phones
produce electromagnetic fields. These can negatively influence
the scooter electronics functions.
• Do not drive close to strong radio or television transmitters

(transmitter masts).

• Switch the scooter off if you are using your mobile phone.

Interference caused to other devices!

The scooter produces an electromagnetic field which can
negatively affect functioning of electrical devices such as
medicinal devices, radio receivers or mobile telephones within
the vicinity.

1.7

12

«
...
10
11
12
13
14
...
»

Содержание Super 8 ForU

















































































Отзывы:

Нет отзывов

Похожие инструкции для Super 8 ForU

Бренд: RACCEWAY Страницы: 53

Бренд: Zizito Страницы: 38

Expedition HURES36

Бренд: HURTLE Страницы: 18

Бренд: MJM Страницы: 17

Бренд: PLAYTIVE JUNIOR Страницы: 22

50 AGILITY PREMIUM 4T

Бренд: KYMCO Страницы: 1

Бренд: Hudora Страницы: 8

Бренд: Hamax Страницы: 6

Бренд: Huffy Страницы: 20

Бренд: Huffy Страницы: 20

Бренд: BOOSTBIKES Страницы: 16

Бренд: Hover-1 Страницы: 28

SPORTMOD 15130412

Бренд: Razor Страницы: 13

Бренд: Razor Страницы: 16

Бренд: Razor Страницы: 16

Бренд: Razor Страницы: 32

Бренд: GLARE WHEEL Страницы: 23

Бренд: HYOSUNG Страницы: 56

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды