KYMCO MYROAD 700i, Руководство по обслуживанию

Страница: 9 / 95

1
. GENERAL INFORMATION
1-6
MYROAD 700i
„
After routing, check that the wire harnesses
are not twisted or kinked.
„
Wire harnesses routed along with
handlebar should not be pulled tight, have
excessive slack or interfere with adjacent
or surrounding parts in all steering
positions.
„
When a testing device is used, make sure to
understand the operating methods
thoroughly and operate according to the
operating instructions.
„
Be careful not to drop any parts.
„
When rust is found on a terminal, remove
the rust with sand paper or equivalent
before connecting.
„
Symbols:
The following symbols represent the
servicing methods and cautions included in
this service manual.
: Apply engine oil to the
specified points. (Use
designated engine oil for
lubrication.)
: Apply grease for lubrication.
: Transmission Gear Oil (90#)
: Note
Engine Oil
Grease
Gear Oil
＊
Do you understand
the instrument
？
Remove Rust
！