KYMCO MYROAD 700i, Руководство по обслуживанию

Страница: 87 / 95

4
. LUBRICATION SYSTEM
4-2
MYROAD 700i
SERVICE INFORMATION
GENERAL INSTRUCTIONS
•
The oil pump service may be done with the engine installed in the frame.
•
When removing and installing the oil pump use care not to allow dust or dirt to enter the engine.
•
If any portion of the oil pump is worn beyond the specified service limits, replace the oil pump as
an assembly.
•
After the engine has been installed check that there are no oil leaks and that oil pressure is
correct.
•
For oil pressure indicator inspection, refer to section 20 of this manual.
SPECIFICATIONS
Unit: mm
ITEM STANDARD SERVICE LIMIT
At draining 2.6 liter
⎯
At disassembly 3.0 liter
⎯
Engine oil
capacity
Recommended engine oil
KYMCO 4-stroke oil or
equivalent motor oil
API service classification SJ
Viscosity: SAE 5W-50
⎯
Tip clearance 0.15 mm 0.2 mm
Body clearance 0.15 – 0.2 mm 0.25 mm
Oil pump rotor
Side clearance 0.04 – 0.09 mm 0.12 mm
TORQUE VALUES
Oil pump bolt 0.8~1.2 kgf•m
Oil cooler bolt 1.2~1.8 kgf•m
Oil pressure switch 1~1.4 kgf•m
Oil filter cartridge 2.0~3.0 kgf•m
TOOLS
Oil filter wrench A120E00061