KYMCO MXU 450i, Руководство по обслуживанию

Страница: 157 / 172

11
. EFI SYSTEM
MXU 450i
11-16
Blink
Failure
Codes
Fault description Priority Solution
11 P0350
Ignition coil or electric
circuit malfunction
2
Check if the connector of ignition coil is loosen.
Check if the ECU is signaled to Ignition coil.
Check if the power source and resistance is
malfunction
12 P0230
Fuel pump relay or
electric circuit
malfunction
2
Check if the connector of relay is loosen.
Check if the ECU is signaled to relay.
Check the fuel pump relay resistance
13 P0219
Engine speed is over
than top speed
2 Check if the belt of CVT is broken.
14 P1560
Sensor don’t receive
power source from ECU
2
Check if ECU output DC5V to sensor.
Check if the power source of all sensor is DC5V.
Replace a new ECU if the CELP still blinks even
the output power source of ECU is normal.
15 P0700
Engine starting speed
exceed CVT speed
limited
2 Don’t use it at present.
16 P0115
Engine temperature
sensor or electric circuit
malfunction
2
Check if the connector of sensor is loosen.
Check if ECU pin is broken.
3.Check if the resistance of sensor is malfunction.
17 P1561
Temperature gauge
electric circuit
malfunction
2 Not available
18 P0650
CELP electric circuit
malfunction
3
Check if the lamp of CELP is broken.
Check if the wires of CELP are broken.
21 P0105
Atmospheric Pressure
Sensor/Circuit
Malfunction
2
Check if the connector of sensor is loosen.
Check if ECU pin is broken.
Check if voltage of sensor is fit in specification.
22 P0110
Roll sensor or electric
circuit malfunction
2
Check if the sensor installation direction is correct.
Check if voltage of sensor is fit in specification.
Check if ECU pin is broken.