1
. GENERAL INFORMATION
1-9
Wire harnesses routed along with handlebar
should not be pulled tight, have excessive slack or
interfere with adjacent or surrounding parts in all
steering positions.
When a testing device is used, make sure to
understand the operating methods thoroughly and
operate according to the operating instructions.
Be careful not to drop any parts.
When rust is found on a terminal, remove the rust
with sand paper or equivalent before connecting.
Do not bend or twist control cables. Damaged
control cables will not operate smoothly and may
stick or bind.
Do you understand
the instrument? Is
the instrument set
correctly?
Remove Rust !
Symbols:
The following symbols represent the servicing
methods and cautions included in this service
manual.
: Apply engine oil to the specified
points. (Use designated engine
oil for lubrication.)
Engine Oil
