KYMCO DOWNTOWN 300i 2011, Руководство пользователя

Страница: 53 / 58

STORAGE GUIDE
Storage Guide
Extended storage, such as for the winter months, requires that you take certain steps to reduce the effects of deterioration from the non-use of your
scooter. Whenever possible, perform any necessary periodic maintenance or repairs before storage so the scooter will be in good condition for
riding when it is removed from storage.
Storage:
1. Change the engine oil and filter.
2. Drain the carburetor (if equipped) and empty the fuel tank into an approved
gasoline container using a commercially available hand siphon or an equivalent
method. Spray the inside of the tank with an aerosol rust-inhibiting oil. Close the
fuel filler cap on the fuel tank.
3. To prevent rusting in the cylinder, perform the following:
a. Remove the spark plug cap from the spark plug, and use tape or
string to secure the cap to any convenient plastic body part so that it is positioned away from the spark plugs.
b. Remove the spark plug from the engine and store it in a safe, dry place. Do not connect the spark plug to the spark plug cap.
c. Pour a tablespoon (15 - 20 cc) of clean engine oil into the cylinder and cover the spark plug hole with a piece of cloth.
d. Crank the engine several times to distribute the oil.
e. Reinstall the spark plug and spark plug cap.
4. Remove the battery. Store it in an area protected from freezing temperatures and direct sunlight. Slow charge the battery once a month
(use a quality charger designed for use on a maintenance-free type battery).
5. Wash and dry the scooter. Wax all painted surfaces. Coat the chrome or bare aluminum parts with rust inhibiting oil.
6. Inflate the tires to their recommended pressures. Place the scooter on blocks to raise both tires off the ground.
7. Cover the scooter (don't use plastic or other coated materials) and store in an unheated area, free of excessive moisture, with a minimum
of daily temperature variation. Do not store the scooter in direct sunlight, as the sun's UV rays can damage the body work and other
components.
Removal from storage:
1. Uncover and clean the scooter.
2. Change the engine oil if more than 1 month has passed since the start of storage.
3. Charge the battery as required (use a quality charger designed for use on a maintenance-free type battery). Install the battery.
4. Drain any excess aerosol rust-inhibiting oil from the fuel tank. Fill the fuel tank with fresh gasoline.
5. Perform all the pre-ride inspection checks (see pages 28). Test ride the scooter at low speeds in a safe riding area, away from traffic.
WARNING
Gasoline is highly flammable and explosive. You
can be burned or seriously injured when
handling fuel. Stop the engine and keep heat,
sparks, and flame away. Refuel the scooter
outdoors and wipe up any spills immediately.
51