background image

   

MAINTENANCE SCHEDULE 

 

 

Maintenance schedule 
 

Perform the pre-ride inspection (see page 

28) at each 

scheduled maintenance period. This interval should be judged by odometer reading or 

months, whichever comes first. 

 

Maintenance schedule legend (see page 36): 

I: 

INSPECT AND CLEAN, ADJUST, LUBRICATE OR REPLACE IF NECESSARY 

C

: CLEAN  

R

: REPLACE  

A

: ADJUST  

L

: LUBRICATE  

T

: TIGHTEN 

 
The maintenance schedule on 

page 36

 specifies the maintenance required to keep your Super 8 scooter in peak operating condition. Maintenance 

work should be performed in accordance with KYMCO standards and specifications by properly trained and equipped technicians. Your local 
authorized KYMCO dealer meets all of these requirements. 

 

* 

Should be serviced by your local authorized KYMCO dealer, unless you have the proper tools, service data and are technically qualified. 

* * 

In the interest of safety, we recommend these items be serviced only by your local authorized KYMCO dealer. KYMCO Canada recommends 

that your local authorized KYMCO dealer does a road test with your scooter after each periodic maintenance service is completed. 

 

 

 
 

 
 

 

 

35

Содержание DOWNTOWN 300i 2011



























































Отзывы: