background image

   

INSTRUMENT CLUSTER 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

(1)

 

Odometer / Trip Meter: 

Press the “MODE” button to toggle between the  

      overall and trip mileage. 

ƒ

 

Press the “ADJ” button for two seconds, 

which then display the ODO, TRIP (A,B), or 
SERVICE mode. 

ƒ

 

Press the “ADJ” and “MODE” button 
simultaneously at the TRIP mode to reset 

automatically. 

 

(2)

 

Speedometer: 

Indicates the road speed in km/h. 

 

(3)

 

Turn Signal Indicator Light:  

Flashes when either turn signal is being  

  used.

 

 
(4)

 

High Beam Indicator Light: 

This light is illuminated when the headlight  

high beam is on. 

 

(5) Fuel Refill Indicator 

This indicator lights when the fuel tank is near  

          empty to alert the rider to refill the tank as  
          soon as possible. 

 

(6)

 

Tachometer: 

Indicates the engine speed in the revolutions per minute  

  (RPM). 

 

(7)

 

Clock: 

Digital clock display. 

 

(8)

 

Coolant Temperature Gauge: 

 Displays the coolant temperature. 

Instrument Cluster 
 

 

17

Содержание DOWNTOWN 300i 2011



























































Отзывы: