KYLAND Aquam5 Series Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 16

KYLAND Aquam5 Series Скачать руководство пользователя страница 6

1 Product Overview

Aquam5/Aquam8  includes  a  series  of  high-performance  industrial  Ethernet
switches  developed  by  Kyland.  The  series  devices  are  applicable  to  the
industrial  field  of  various  harsh  environment  with  strict  requirements  on
reliability due to the solid closed housing, fanless but heat dissipation-capable
single-rib  shaped  chassis,  overcurrent,  overvoltage  for  power  input,  sound
EMC protection of M12 ports, and IP67 protection class. All the devices meet
the requirements stipulated in the EN50155, EN50121, EN55022 Class A&B
and FCC CFR47 Part 15 industrial standards.
The switches support panel mounting. They provide up to eight 10/100Base-T
(X) Ethernet ports.

1

Table 1 Models

Aquam5-5T-LV-LV, Aquam8-8T-LV-LV

8T: eight 10/100Base-T(X) M12 ports

Remarks

LV-LV(24VAC/DC(18-30VAC, 50/60Hz; 12-48VDC), 20%

tolerance of the voltage range, redundant power input)

Note:

We reserve the right to amend the product information listed in this table
without notice. To obtain the latest information, you can contact our
sales or technical support personnel.

Aquam5-H-5T-LV-LV, Aquam8-H-8T-LV-LV

Protection

rating

H: IP67

N/A: IP65

Note: IP protection rating is beyond the scope of UL

certification.

«
...
4
5
6
7
8
...
»

Содержание Aquam5 Series

















Отзывы:

Нет отзывов