KYLAND Aquam5 Series, Руководство по установке оборудования

Страница: 13 / 16

8
Step 1: Ground the device properly according to section 4.2.
Step 2: Insert one end of the power cable into the M12 connector firmly.
Step 3: Insert the M12 connector with the connected cable into the power port
on the device.
Step 4: Connect the other end of the power cable to an external power supply
system according to the power supply requirements of the device. View
the status of the power LED. If the LED is on, the power is connected
properly.
●
Wiring and Mounting
Caution:
●
●
Do not touch any exposed conducting wire, terminal, or component
with a voltage warning sign, because it may cause personal injury.
Do not remove any part or plug in or out any connector when the
device is powered on.
●
●
Before connecting the device to power supply, make sure that the
power input meets the power requirement. If connected to an
incorrect power input, the device may be damaged.
To comply with UL restrictions, this equipment must be powered
from a source compliant with SELV.
Warning:
Figure 8 Power Port (male)
Table 3 Pin Definitions of Power Port
●
Pin Definition
2
3
1
4