SICOM3010G User’s Manual-v1.0
23
Figure 25 3-Pin 5.08mm-Spacing Plug-In Terminal Blocks
The electrical parameters of the relay:
Max Switch Voltage: 250VAC/220VDC;
Max Switch Current: 2A
Max Switch Power: 60W
Note
: Pin 1 and pin 2 are normally-open contacts; pin 2 and pin 3 are normally-closed
contacts. When the switch works normally, the pin 1 and 2 are closed, pin 2 and pin 3 are
open; when the alarm occurs, the pin 1 and 2 are open; pin 2 and 3 are closed.
Wiring and mounting
Step 1: Take the alarm terminal block off the switch.
Step 2: Insert the cable for alarm output into the alarm terminal block
according to the requirements and connect the cable.
Step 3: Put the alarm terminal block back to the switch with the connected
cable.
6 LED Indicators
Table 8 Front Panel LED
LED
State
Description
Running LED
