SICOM3010G User’s Manual-v1.0
11
then slide down SICOM3010G as seen below; finally screw 4 screws tightly.
Now the SICOM3010G should be firmly fixed to the wall or cabinet.
Figure 8 Panel Mounting
Remove SICOM3010G from wall or cabinet
The specific steps are as follows:
Step 1: Use a screwdriver to loosen 4 screws; move the switch up to let
screws into 4 holes with the diameter of 6.5mm (
Ф6.5).
Step 2: Unscrew the screws from wall or cabinet; remove the switch from
wall or cabinet.
Figure 9 Dismounting
