KYLAND Technology KIEN2204S Скачать руководство пользователя страница 21

Страница: 21 / 23

Connection

device.

Step 5: Connect the other end of the power wires to the external power supply system according to

the power supply requirements of the device. View the status of the power LEDs on the

front panel. If the LEDs are on, the power is connected properly.

Figure 20 Connection of 5-Pin 5.08mm-Spacing Plug-in Terminal Block

Caution:

The switch supports 48DC power input. Before connecting the device to power supply, make sure that the

power input meets the power requirement. If connected to an incorrect power input, the device may be

damaged.

Warning:



Do not touch any exposed conducting wire, terminal block, or component with a voltage warning sign,

because it may cause damage to humans.



Do not remove any part or plug in or out any connector when the device is powered on.

Содержание KIEN2204S
























Результаты поиска

Содержание KIEN2204S

Отзывы:

Похожие инструкции для KIEN2204S

Бренды по названию

Популярные бренды

KYLAND Technology KIEN2204S, Руководство по установке оборудования

Результаты поиска

Содержание KIEN2204S

Отзывы:

Похожие инструкции для KIEN2204S

Бренды по названию

Популярные бренды