background image

 

1

 

1. Instruction 

 
The PLUSTV 1680EX uses the professional progressive scanning TV (DPTV) chip, 
which adopts such picture improvement technologies as black level stretch, video 
noise suppression, and 3D motion compensation etc, so it gives clearer and more 
flamboyant pictures and stronger three-dimensional perception.   
 
In addition, its specific scanning frequency increasing technology increases the 
refresh frequency from original 50Hz to 60Hz or 75Hz* (optional), which effectively 
conquers the large area flicker and interline flicker in picture caused by the low 
refresh frequency (50Hz only) of ordinary TV and improves the stability of picture, 
so it can reduce the visual fatigue due to long TV watching. 
 
The PLUSTV 1680EX can support CRT monitor and traditional or wide-screen LCD 
monitor. It is the increases of fresh frequency and resolution (up to 800X600/ 
1024X768/ 1280X1024/ 1440X900/ 1680x1050) that solve the problem that 
ordinary PC TV receiver is not compatible with LCD monitor. Connecting this 
product with an LCD monitor, you can easily get a fashionable and healthy LCD TV. 
 
The PLUSTV 1680EX has PIP (Picture In Picture) function at PC mode, which 
allows you to enjoy wonderful TV programs while operating PC, so neither work nor 
entertainment is held up. Furthermore, it has multi-channel pre-view function, which 
enables you to view the program of each channel conveniently. 
 
In addition, the PLUSTV 1680EX has 3D noise reduction function, which makes the 
picture more exquisite, clearer and more stable. 
 

1.1 Functions and features   

z

  Advanced scanning frequency increasing technology to make the refresh 

rate up to 60Hz or 75Hz, which delivers stable pictures without flicker. 

z

  Resolution can be conveniently changed over among 800X600/ 1024X768/ 

1280X1024/ 1440X900/ 1680X1050. Be fully compatible with CRT monitor 
and traditional or wide-screen LCD monitor. 

z

  Support 4:3/16:9 picture aspect ratio. 

z

  9/16-channel pre-view function to facilitate the channel selection. 

z

  Still-picture function enables you to capture wonderful moments in TV 

program. 

z

  Super 3D picture noise reduction function to make picture clearer and more 

stable. 

z

  Special PIP function to give size and position adjustable window. 

*PIP mode can’t work on PC display resolution 1680X1050. 

Содержание PLUSTV 1680ex



















Отзывы: