Insert the thicker cable into the square connector on the
interior assembly.
Wait about 10 seconds after initialization. Using one hand,
gently touch the exterior deadbolt rose.
8
10
12
Connect the thinner cables together.
Insert the battery pack into the interior assembly. The light
ring will spin amber during initialization.
If you see the light ring spin blue, your Kevo’s touch sensor
is working properly, and you can disconnect the parts and
install them on your door by following the Installation Guide.
IMPORTANT:
Do not overtighten screws during installation.
7
9
11
If you don’t see the light ring spin blue, the touch sensor is
not functioning properly. Please call Kevo Support at
1-877-543-3358.
©2013 Kwikset Corporation
