Kwikot Kwiksol, Инструкция по эксплуатации, установке и гарантийный талон, Страница: 6 / 28

6 Kwiksol Instruction, Installation & Warranty Manual
The water to be used from the solar water heater does not circulate through the solar flat
plate collector panel/s, but remains in the solar water heater and is heated through a heat
exchanger around the inner vessel. Propylene glycol is used to circulate through the solar
flat plate collector panel/s, transferring solar energy into the heat exchanger and in turn
heating the water stored in the solar water heater.
The solar water heater is fitted with a thermostat and element in the event the solar energy
is not strong enough to heat the water to the required set temperature i.e. on overcast days
and in the evening.
The Indirect system can be installed as a close coupled system (thermosyphon circulation
method) or as a split system (themosyphon or pumped circulation methods).
Number and Size of Solar Flat Plate Collector Panel to Use
SOLAR WATER
HEATER
NUMBER OF
PANELS
ENERGY
TRANSFER LIQUID
HEAT LOSS
AT NIGHT
150lt 1 x 2m2 Propylene Glycol 9,84%
200lt 1 x 2.5m2 Propylene Glycol 13,34%
300lt 2 x 2m2 Propylene Glycol 8,50%
F. FEATURES OF SOLAR FLAT PLATE COLLECTOR PANEL
• Black coated aluminum frame, 4mm toughened prismatic
and non-reflective anti-hail tempered glass.
• Durable copper waterway tubes.
• Rubber seals ensure durability and reliability in extreme
climatic conditions.
• Semi-selective black chrome surface on copper substrate
offers maximum absorption efficiency.
PRODUCT
CODE
DIMENSIONS
(mm)
APERTURE
AREA (m2)
MASS
EMPTY(kg
MASS
FULL (kg)
ENERGY TRANSFER
FLUID BY SYSTEM
Direct Indirect
SOL-
PANEL-2
2000 x 1000
x 80
2 30 32 Water Propylene
Glycol
SOL-
PANEL-2.5
2000 x 1250
x 80
2.5 40 46 Water Propylene
Glycol
2m 2 2.5m 2