8. Confirm 89-1/2” measurements from center to
end seat frames and tighten all six seat frame
brace bolts
6. Position center seat frame at 89-1/2” from end
seat frame (secured in step 5), square seat
frame with planks and tighten both plank bolts.
7. Position loose end seat frame at 89-1/2” from
center seat frame, square seat frame to plank
and tighten both plank bolts.
5. Position plank to extend past end seat frame by
1-1/2”. Be sure seat frame is square with plank
and tighten both plank bolts.
89-1/2”
measure to
outside of
seat frames
89-1/2”
measure to
outside of
seat frames
89-1/2” measure to
outside of seat frames
NZ448 Rev. 01/16/20
Plank Bolts
1-1/2”
THIS UNIT MUST BE ANCHORED ACCORDING TO THESE INSTRUCTIONS AT ALL TIMES
THIS EQUIPMENT MUST BE STORED IN A SECURED, SHELTERED AREA WHEN NOT IN USE
OR IN THE THREAT OF HIGH WINDS. ANY WEATHER DAMAGE TO THIS EQUIPMENT WILL
NOT BE COVERED UNDER KWIK GOAL’S PRODUCT GUARANTEE. DO NOT LEAVE THIS
EQUIPMENT UNATTENDED.
WARNING