NZ448 Rev. 01/16/20
18. Hardware for this step is in the
Top Hdw
pack.
After cover is completely attached, turn shelter up on wheels and engage brakes on swivel wheels
w/brake. Place crossbar caps on each end of crossbars.
Attach stabilizer bars to both end seat frames as shown.
19. Hardware for step 19 and 20 is in the
Anchor Hdw
pack.
Crossbar Cap
(4 Places)
Crossbar
3/8”x 2-1/2” Eye Bolt
3/8”Flat Washer
3/8”Lock Nut
Stabilizer Bar
Seat Frame
THIS UNIT MUST BE ANCHORED ACCORDING TO THESE INSTRUCTIONS AT ALL TIMES
THIS EQUIPMENT MUST BE STORED IN A SECURED, SHELTERED AREA WHEN NOT IN USE
OR IN THE THREAT OF HIGH WINDS. ANY WEATHER DAMAGE TO THIS EQUIPMENT WILL
NOT BE COVERED UNDER KWIK GOAL’S PRODUCT GUARANTEE. DO NOT LEAVE THIS
EQUIPMENT UNATTENDED.
WARNING