Ground Anchor
1/2" x 4" Hex Bolt
1/2" Flat Washer
Right Arm
Assembly
6. For ground anchor use, mark ground anchor hole location, move goal and dig holes a minimum of 24“ in
diameter and 20” deep as shown. Areas subject to heavy ground frost may go as deep as 36”. Attach ground
anchors to assembled goal and secure with coated bolts. Set goal in desired installation location with anchors
in holes. Fill area surrounding the anchor with concrete.
NOTE: When removing goal from field location,
be sure to disassemble and store in a safe place
to prevent injury. (If ground anchors are used,
insert red ground anchor caps into exposed
ground anchor holes to prevent damage to
threads.)
IMPORTANT
Ground anchors are the recommended and
safest method of anchoring your goal.
For anchoring options see steps 7 or 10.
Anchor Hole Detail
(4 places per goal)
Ground Anchor
Field Surface
20”
Min
12-3/4”
24” Min
Concrete
Concrete
Stone
60
°
Approx.
NZ261 Rev. 09/26/18
***CAUTION***
This equipment has been designed to be used for the game of field hockey only. Field equipment
must be anchored AT ALL TIMES and shall be secured against overturning. Do not climb on the net
or equipment framework at anytime! All fastenings must be checked to insure they are fully
tightened before and after each use of this product. Equipment not in use must be disassembled
and properly stored in a safe, secure area. Assembled field equipment should not be left
unattended. Remove nets when equipment is not in use. Do not use this equipment during the
threat of high winds. Field equipment must be checked for safety before and after each use. All
warning and safety labels included with this product must be visible at all times. Any modifications
to this or any Kwik Goal product will void any and all warranties.
