4. Lay out right arm assembly and left arm assembly face down on turf as shown. Insert channel spacers into
channel on each side of crossbar. Insert sleeve of left and right arm assemblies into crossbar. Line up all
holes. Connect crossbar with hex bolts as shown. Press joints together firmly before tightening bolts.
CAUTION: DO NOT OVER TIGHTEN BOLTS
.
3/8” Flat Washer
Right Arm
Assembly
3/8” X 1-1/4” Hex Bolt
3/8” Lock Washer
Channel
Spacer
Crossbar
Left Arm Assembly
Right Arm Assembly
Crossbar
NZ261 Rev. 09/26/18
***CAUTION***
This equipment has been designed to be used for the game of field hockey only. Field equipment
must be anchored AT ALL TIMES and shall be secured against overturning. Do not climb on the net
or equipment framework at anytime! All fastenings must be checked to insure they are fully
tightened before and after each use of this product. Equipment not in use must be disassembled
and properly stored in a safe, secure area. Assembled field equipment should not be left
unattended. Remove nets when equipment is not in use. Do not use this equipment during the
threat of high winds. Field equipment must be checked for safety before and after each use. All
warning and safety labels included with this product must be visible at all times. Any modifications
to this or any Kwik Goal product will void any and all warranties.
