5. Attach back board and fasten eye bolt to back drop on left and right arm assemblies as shown.
IMPORTANT: FIELD HOCKEY BOARDS HAVE BEEN DESIGNED FOR GAME USE ONLY. CLOSE-RANGE
SCORING PRACTICE WILL CAUSE PERMANENT DAMAGE TO BOARDS.
3/8” Flat Washer
3/8” Flat Washer
3/8” Lock Nut
3/8” X 2-1/2”Hex Bolt
Back Board
Note: You can use secure net clip
driver to hold eye bolt while
installing lock nut.
Secure Net Clip Driver
1/4” X 2” Eye Bolt
Back Board
Back Drop
1/4” Lock Nut
1/4” Flat Washer
1/4” X 2” Eye Bolt
NZ261 Rev. 09/26/18
***CAUTION***
This equipment has been designed to be used for the game of field hockey only. Field equipment
must be anchored AT ALL TIMES and shall be secured against overturning. Do not climb on the net
or equipment framework at anytime! All fastenings must be checked to insure they are fully
tightened before and after each use of this product. Equipment not in use must be disassembled
and properly stored in a safe, secure area. Assembled field equipment should not be left
unattended. Remove nets when equipment is not in use. Do not use this equipment during the
threat of high winds. Field equipment must be checked for safety before and after each use. All
warning and safety labels included with this product must be visible at all times. Any modifications
to this or any Kwik Goal product will void any and all warranties.
