manualshive.com logo in svg

Kwik Lok 086A, Инструкция по эксплуатации, Страница: 34 / 34

Поделиться
Скачать
Kwik Lok 086A Скачать руководство пользователя страница 34

F

APPENDIX

Kwik Lok 

WARRANTY POLICY

Seller warrants that the equipment shall be free of defective workmanship or materials, its obligation

under this warranty to consist exclusively of repairing or replacing, free of charge f. o. b. its factory, any

parts received at its factory within two years from the date of shipment of the respective equipment or

parts alleged to be defective and determined by Seller upon inspection to be defective.  No other

warranty, expressed or implied, as to description, quality, merchantability, fitness for a particular

purpose, or any other matter is given by Seller in connection with this sale. Under no circumstances

shall Seller be liable for loss or profits or other consequential damages,  or for any other direct or

indirect costs, expenses, equipment or any part thereof.  Neither shall the Seller be liable for any

defects attributable to the use of any parts,  supplies or service not manufactured,  supplied or provided

by the Seller.

Electric motors and controls carry a one year warranty in which motors or controls will be repaired and

returned to the Buyer at no charge if the manufacturer determines the equipment to be defective in

workmanship and / or materials.

EXECUTIVE OFFICE P.O. BOX 9548  YAKIMA, WA.  98909

 TELEPHONE: 1-800-688-5945 or  (509) 248-4770

FAX: (509) 457-6531

Internet: www.kwiklok.com

CORPORATION

®

®

SUGGESTED SPARE PARTS INVENTORY FOR THE

TYPE 086A CLOSER

Part no.

Description

Qty.

OS-012

Spring

2

OS-117

Spring

1

OS-118

Spring

2

P11-00270

Fuse - 115VAC

5

P11-00616

Fuse - 200 - 240VAC

5

P12-00085

Switch - Limit

1

NOTE:

Specify on the order the TYPE, MODEL,

and SERIAL NUMBER of the machine for which

the parts are ordered.  This information will be

found on the machine’s nameplate.

CONTACT THE FACTORY FOR

CURRENT PRICES.

086 A 6 01

Содержание 086A



































Отзывы:

Нет отзывов