SECTION III
Adjustments
P 3.4
086A 08 08
G. SENSOR LEVER SPRING:
The sensor lever spring is designed to apply force
to the sensor lever tip against the side of the closure
as well as upward against the underside of the
closure track. For the spring to operate correctly it
must be mounted as shown in Figure 3.7.
H. SENSOR LEVER STOP ADJUSTMENT
(Figures 3.8 & 3.9):
The sensor lever stop is a bushing which limits the
travel of the sensor lever when no closures are
present. The bushing is secured under a 10-32
button head screw. There is clearance between the
two so the position of the bushing can vary. When
no closures are present, the sensor lever tip should
be centered below the inspection hole in the top
track.
1.
Loosen the mounting screw and move the
bushing as needed.
2.
Retighten the mounting screw.
Figure 3.7
Figure 3.8
Figure 3.9
Closure track assembly as viewed from the underside.
Содержание 086A
