NZ182 Rev. 07/17/17
***CAUTION***
This goal has been designed to be used for the game of football or soccer only. Goal posts must be anchored AT ALL
TIMES and shall be secured against overturning. Do not climb on the net or goal framework at any time! All
fastenings must be checked to insure they are fully tightened before and after each use of this product. Goal posts
not in use must be disassembled and properly stored in a safe, secure area (See included Guidelines for Moveable
Soccer Goal Safety.). Assembled goal posts should not be left unattended. Remove nets when goals are not in use.
Do not use this equipment during the threat of high winds. Goal posts should be checked for safety before and after
each use. All warning and safety labels included with this product must be visible at all times.
Any modifications to this or any Kwik Goal product will void any and all warranties.
Down - Bow
Up - Arch
Crossbar
Cause Bow in Crossbar
Left Post
Right Post
Concrete
Field Surface
Ground Sleeve
Large Stone
Cause Bow in Crossbar
Cause
Arch
in
Crossbar
Cause
Arch
in
Crossbar
Front View
8. Set assembled goal posts with post ground sleeves into holes. Plumb and level goal, making sure the bottom of
crossbar is 8 feet from the field surface. Face of the goal post should not enter into playing field. Seal space
between left post and right post, and post ground sleeve with tape, or small bead of sealer. This will stop debris
from entering ground sleeves during construction.
9. Fill holes with concrete, flush to the top of ground sleeves. Be sure to level posts before concrete begins to cure.
After concrete has fully cured, see Step 18 for test procedures to ensure the goal has been anchored properly.