NZ182 Rev. 07/17/17
Backstay Brace (2)
(Part# VZ328P2)
Backstay (2)
(Part# VZ328P1)
Net Strap (1)
(Part# 10B4406 Pack of 2)
Net (1)
(Part# 3B6826)
***CAUTION***
This goal has been designed to be used for the game of football or soccer only. Goal posts must be anchored AT ALL
TIMES and shall be secured against overturning. Do not climb on the net or goal framework at any time! All
fastenings must be checked to insure they are fully tightened before and after each use of this product. Goal posts
not in use must be disassembled and properly stored in a safe, secure area (See included Guidelines for Moveable
Soccer Goal Safety.). Assembled goal posts should not be left unattended. Remove nets when goals are not in use.
Do not use this equipment during the threat of high winds. Goal posts should be checked for safety before and after
each use. All warning and safety labels included with this product must be visible at all times.
Any modifications to this or any Kwik Goal product will void any and all warranties.
Hardware
Note: Hardware may be packaged separately
in one or more boxes. Open all packages
before beginning assembly.
3/8“ x 1 1/4” Hex Bolt
(Part# TZ59)
(4)
3/8“ x 1 3/4” Hex Bolt
(Part# TZ227)
(4)
3/8" x 7/8" Hex Bolt
(Part# TZ249)
(6)
3/8“ Lock Washer
(Part# TZ65)
(10)
3/8“ Flat Washer
(Part# TZ60)
(14)
3/8” Lock Nut
(Part# TZ197)
(4)
3/8" Square Nut
(Part# TZ247)
(6)
5/16" Eyebolt
(Part# TZ270)
(2)
5/16" Flat Washer
(Part# TZ269)
(2)
5/16” Lock Nut
(Part# TZ5)
(2)
1/4” Set Screw
(Part# TZ252
) (2)
3/16” X 1” Spring Pin
(Part#TZ253)
(4)
7/16” X 2-1/2” Hex Bolt
(Part# TZ41)
(2)
7/16” Lock Nut
(Part# TZ47)
(2)
Assembly Tools
9/
16
1/2”, 9/16” & 5/8”
Wrenches
Ratchet with
1/2”, 9/16” & 5/8”
Sockets
Scissors
AND
Net Clip (40)
(Part# 10B3101 Pack of 100)
Channel Spacer (2)
(Part# UZ812)
1/8” Hex
Wrench
T Spacer (2)
(Part# WZ442)
Post Ground
Sleeve Cap (2)
(Part# UZ66)
