TracVision R5SL
5
Gyro Replacement Instructions
j.
Route the gyro cable from the bottom of the gyro
housing toward the front of the antenna, then route the
cable under the RF cable (see
Figure 8
).
NOTE:
Do not route the gyro cable from the side of the gyro housing
closest to the main PCB.
Figure 8 Gyro Cable Routing
k.
Connect the gyro cable to the main PCB.
Figure 9 Gyro Cable Connector
l.
Using a #1 Phillips screwdriver, secure the gyro to the
gyro housing using the two screws you removed in
Step 1g on page 4
.
Step 2 - Complete the Installation
a.
Gently reinstall the main PCB cover. Ensure no cables
are damaged by the edges of the cover and that the
corrugated sleeve on the elevation motor cable is
positioned under the edge of the cover.
b.
Using a #1 Phillips screwdriver, secure the main PCB
cover using the four screws you removed in
Step 1e on page 3
.
Gyro
Screws
Gyro
Housing
RF Cable
Gyro Cable
Main PCB
Gyro Cable
Connector
J11
Main PCB
